problem with gdxxrw.exe

GAMS
1

Hi everybody!

I’m trying to call a gams model from matlab, but every time I execute the the gams command (routine?), I get the " gdxxrw.exe has stopped working" error.
The model reads the data from excel files(xls not xlsx) and I run the model within the gams IDE just fine!

Any suggestion what the problem might be?

Thanks in advance

Babak

–
To unsubscribe from this group and stop receiving emails from it, send an email to gamsworld+unsubscribe@googlegroups.com.
To post to this group, send email to gamsworld@googlegroups.com.
Visit this group at http://groups.google.com/group/gamsworld.
For more options, visit https://groups.google.com/groups/opt_out.

2

Dear Babak Y,
This problem is occurs due to improper path setting between GAMS and MATLAB in your computer.
So set the path as follows:

  1. Go to computer properties
  2. Open System Advanced setting
  3. Then go to environment variables
  4. Search path in the system variables and press edit
  5. Then in the variable value type semicolon ; and copy link of your installed GAMS software
    (e.g. C:\GAMS\win32\24.0)

After setting path rerun your program in MATLAB…enjoy…



On Mon, Sep 2, 2013 at 11:06 PM, B.Y wrote:

Hi everybody!

I’m trying to call a gams model from matlab, but every time I execute the the gams command (routine?), I get the " gdxxrw.exe has stopped working" error.
The model reads the data from excel files(xls not xlsx) and I run the model within the gams IDE just fine!

Any suggestion what the problem might be?

Thanks in advance

Babak

–
To unsubscribe from this group and stop receiving emails from it, send an email to gamsworld+unsubscribe@googlegroups.com.
To post to this group, send email to gamsworld@googlegroups.com.
Visit this group at http://groups.google.com/group/gamsworld.
For more options, visit https://groups.google.com/groups/opt_out.



\

Kailash Chand Sharma
Research Scholar
Electrical Engineering Department
Malaviya National Institute of Technology Jaipur
Phone: +91-9887221353 (M)

–
To unsubscribe from this group and stop receiving emails from it, send an email to gamsworld+unsubscribe@googlegroups.com.
To post to this group, send email to gamsworld@googlegroups.com.
Visit this group at http://groups.google.com/group/gamsworld.
For more options, visit https://groups.google.com/groups/opt_out.

3

Thanks Kailash !


On Tuesday, September 3, 2013 10:41:04 AM UTC+4:30, kailash sharma wrote:

Dear Babak Y,
This problem is occurs due to improper path setting between GAMS and MATLAB in your computer.
So set the path as follows:

  1. Go to computer properties
  2. Open System Advanced setting
  3. Then go to environment variables
  4. Search path in the system variables and press edit
  5. Then in the variable value type semicolon ; and copy link of your installed GAMS software
    (e.g. C:\GAMS\win32\24.0)

After setting path rerun your program in MATLAB…enjoy…



On Mon, Sep 2, 2013 at 11:06 PM, B.Y wrote:

Hi everybody!

I’m trying to call a gams model from matlab, but every time I execute the the gams command (routine?), I get the " gdxxrw.exe has stopped working" error.
The model reads the data from excel files(xls not xlsx) and I run the model within the gams IDE just fine!

Any suggestion what the problem might be?

Thanks in advance

Babak

–
To unsubscribe from this group and stop receiving emails from it, send an email to gamsworld+...@googlegroups.com.
To post to this group, send email to gams...@googlegroups.com.
Visit this group at http://groups.google.com/group/gamsworld.
For more options, visit https://groups.google.com/groups/opt_out.



\

Kailash Chand Sharma
Research Scholar
Electrical Engineering Department
Malaviya National Institute of Technology Jaipur
Phone: +91-9887221353 (M)

–
To unsubscribe from this group and stop receiving emails from it, send an email to gamsworld+unsubscribe@googlegroups.com.
To post to this group, send email to gamsworld@googlegroups.com.
Visit this group at http://groups.google.com/group/gamsworld.
For more options, visit https://groups.google.com/groups/opt_out.

4

Hi,
I also had the same problem and tried the solution you mentioned below. I’m still getting the same error. I added both the path to my GAMS folder and to the MATLAB folder. Is there something else that I’m missing? The code runs perfectly within GAM IDE. The exact error is:

“gdxxrw.exe has stopped working – A problem caused the program to stop working correctly. Please close the program.”

Thoughts?

Thanks, J

On Tuesday, September 3, 2013 2:11:04 AM UTC-4, kailash sharma wrote:

Dear Babak Y,
This problem is occurs due to improper path setting between GAMS and MATLAB in your computer.
So set the path as follows:

  1. Go to computer properties
  2. Open System Advanced setting
  3. Then go to environment variables
  4. Search path in the system variables and press edit
  5. Then in the variable value type semicolon ; and copy link of your installed GAMS software
    (e.g. C:\GAMS\win32\24.0)

After setting path rerun your program in MATLAB…enjoy…



On Mon, Sep 2, 2013 at 11:06 PM, B.Y wrote:

Hi everybody!

I’m trying to call a gams model from matlab, but every time I execute the the gams command (routine?), I get the " gdxxrw.exe has stopped working" error.
The model reads the data from excel files(xls not xlsx) and I run the model within the gams IDE just fine!

Any suggestion what the problem might be?

Thanks in advance

Babak

–
To unsubscribe from this group and stop receiving emails from it, send an email to gamsworld+...@googlegroups.com.
To post to this group, send email to gams...@googlegroups.com.
Visit this group at http://groups.google.com/group/gamsworld.
For more options, visit https://groups.google.com/groups/opt_out.



\

Kailash Chand Sharma
Research Scholar
Electrical Engineering Department
Malaviya National Institute of Technology Jaipur
Phone: +91-9887221353 (M)

–
To unsubscribe from this group and stop receiving emails from it, send an email to gamsworld+unsubscribe@googlegroups.com.
To post to this group, send email to gamsworld@googlegroups.com.
Visit this group at http://groups.google.com/group/gamsworld.
For more options, visit https://groups.google.com/groups/opt_out.

5

For months my Gams and GDX was running perfect, now I have the same error. Did you find the solution?

I also unistalled and installed again… And still the same problem.

Segunda-feira, 11 de Novembro de 2013 1:38:22 UTC, Julian Lamy escreveu:

Hi,
I also had the same problem and tried the solution you mentioned below. I’m still getting the same error. I added both the path to my GAMS folder and to the MATLAB folder. Is there something else that I’m missing? The code runs perfectly within GAM IDE. The exact error is:

“gdxxrw.exe has stopped working – A problem caused the program to stop working correctly. Please close the program.”

Thoughts?

Thanks, J

On Tuesday, September 3, 2013 2:11:04 AM UTC-4, kailash sharma wrote:

Dear Babak Y,
This problem is occurs due to improper path setting between GAMS and MATLAB in your computer.
So set the path as follows:

  1. Go to computer properties
  2. Open System Advanced setting
  3. Then go to environment variables
  4. Search path in the system variables and press edit
  5. Then in the variable value type semicolon ; and copy link of your installed GAMS software
    (e.g. C:\GAMS\win32\24.0)

After setting path rerun your program in MATLAB…enjoy…



On Mon, Sep 2, 2013 at 11:06 PM, B.Y wrote:

Hi everybody!

I’m trying to call a gams model from matlab, but every time I execute the the gams command (routine?), I get the " gdxxrw.exe has stopped working" error.
The model reads the data from excel files(xls not xlsx) and I run the model within the gams IDE just fine!

Any suggestion what the problem might be?

Thanks in advance

Babak

–
To unsubscribe from this group and stop receiving emails from it, send an email to gamsworld+...@googlegroups.com.
To post to this group, send email to gams...@googlegroups.com.
Visit this group at http://groups.google.com/group/gamsworld.
For more options, visit https://groups.google.com/groups/opt_out.



\

Kailash Chand Sharma
Research Scholar
Electrical Engineering Department
Malaviya National Institute of Technology Jaipur
Phone: +91-9887221353 (M)

–
To unsubscribe from this group and stop receiving emails from it, send an email to gamsworld+unsubscribe@googlegroups.com.
To post to this group, send email to gamsworld@googlegroups.com.
Visit this group at http://groups.google.com/group/gamsworld.
For more options, visit https://groups.google.com/d/optout.

6

Reply-to: gamsworld@googlegroups.com

I have this exact same problem. Any ideas for a solution?

On Wednesday, May 21, 2014 at 6:39:08 AM UTC-4, ASaLu wrote:

For months my Gams and GDX was running perfect, now I have the same error. Did you find the solution?

I also unistalled and installed again… And still the same problem.

Segunda-feira, 11 de Novembro de 2013 1:38:22 UTC, Julian Lamy escreveu:

Hi,
I also had the same problem and tried the solution you mentioned below. I’m still getting the same error. I added both the path to my GAMS folder and to the MATLAB folder. Is there something else that I’m missing? The code runs perfectly within GAM IDE. The exact error is:

“gdxxrw.exe has stopped working – A problem caused the program to stop working correctly. Please close the program.”

Thoughts?

Thanks, J

On Tuesday, September 3, 2013 2:11:04 AM UTC-4, kailash sharma wrote:

Dear Babak Y,
This problem is occurs due to improper path setting between GAMS and MATLAB in your computer.
So set the path as follows:

  1. Go to computer properties
  2. Open System Advanced setting
  3. Then go to environment variables
  4. Search path in the system variables and press edit
  5. Then in the variable value type semicolon ; and copy link of your installed GAMS software
    (e.g. C:\GAMS\win32\24.0)

After setting path rerun your program in MATLAB…enjoy…



On Mon, Sep 2, 2013 at 11:06 PM, B.Y wrote:

Hi everybody!

I’m trying to call a gams model from matlab, but every time I execute the the gams command (routine?), I get the " gdxxrw.exe has stopped working" error.
The model reads the data from excel files(xls not xlsx) and I run the model within the gams IDE just fine!

Any suggestion what the problem might be?

Thanks in advance

Babak

–
To unsubscribe from this group and stop receiving emails from it, send an email to gamsworld+...@googlegroups.com.
To post to this group, send email to gams...@googlegroups.com.
Visit this group at http://groups.google.com/group/gamsworld.
For more options, visit https://groups.google.com/groups/opt_out.



\

Kailash Chand Sharma
Research Scholar
Electrical Engineering Department
Malaviya National Institute of Technology Jaipur
Phone: +91-9887221353 (M)

–
To unsubscribe from this group and stop receiving emails from it, send an email to gamsworld+unsubscribe@googlegroups.com.
To post to this group, send email to gamsworld@googlegroups.com.
Visit this group at http://groups.google.com/group/gamsworld.
For more options, visit https://groups.google.com/d/optout.

7

Reply-to: gamsworld@googlegroups.com

I also have the same problem, somebody please?

On Thursday, July 30, 2015 at 1:09:41 AM UTC-5, Şafak Yücel wrote:

I have this exact same problem. Any ideas for a solution?

On Wednesday, May 21, 2014 at 6:39:08 AM UTC-4, ASaLu wrote:

For months my Gams and GDX was running perfect, now I have the same error. Did you find the solution?

I also unistalled and installed again… And still the same problem.

Segunda-feira, 11 de Novembro de 2013 1:38:22 UTC, Julian Lamy escreveu:

Hi,
I also had the same problem and tried the solution you mentioned below. I’m still getting the same error. I added both the path to my GAMS folder and to the MATLAB folder. Is there something else that I’m missing? The code runs perfectly within GAM IDE. The exact error is:

“gdxxrw.exe has stopped working – A problem caused the program to stop working correctly. Please close the program.”

Thoughts?

Thanks, J

On Tuesday, September 3, 2013 2:11:04 AM UTC-4, kailash sharma wrote:

Dear Babak Y,
This problem is occurs due to improper path setting between GAMS and MATLAB in your computer.
So set the path as follows:

  1. Go to computer properties
  2. Open System Advanced setting
  3. Then go to environment variables
  4. Search path in the system variables and press edit
  5. Then in the variable value type semicolon ; and copy link of your installed GAMS software
    (e.g. C:\GAMS\win32\24.0)

After setting path rerun your program in MATLAB…enjoy…



On Mon, Sep 2, 2013 at 11:06 PM, B.Y wrote:

Hi everybody!

I’m trying to call a gams model from matlab, but every time I execute the the gams command (routine?), I get the " gdxxrw.exe has stopped working" error.
The model reads the data from excel files(xls not xlsx) and I run the model within the gams IDE just fine!

Any suggestion what the problem might be?

Thanks in advance

Babak

–
To unsubscribe from this group and stop receiving emails from it, send an email to gamsworld+...@googlegroups.com.
To post to this group, send email to gams...@googlegroups.com.
Visit this group at http://groups.google.com/group/gamsworld.
For more options, visit https://groups.google.com/groups/opt_out.



\

Kailash Chand Sharma
Research Scholar
Electrical Engineering Department
Malaviya National Institute of Technology Jaipur
Phone: +91-9887221353 (M)

–
To unsubscribe from this group and stop receiving emails from it, send an email to gamsworld+unsubscribe@googlegroups.com.
To post to this group, send email to gamsworld@googlegroups.com.
Visit this group at http://groups.google.com/group/gamsworld.
For more options, visit https://groups.google.com/d/optout.